BELARUS 1025.3

Home > Catalog > Tractors > Belarus > BELARUS 1025.3

BELARUS 1025.3

The BELARUS-1025.3 tractor copes well with a wide range of tasks on both small and large farms. The tractor belongs to the traction class 1.4 and is designed for various types of activities from agricultural to industrial. Most often, the BELARUS-1025.3 is used as an assistant in soil preparation, crop care and harvesting.
BELARUS-1025.3 is equipped with a 4-cylinder turbocharged engine, developing a power of 110 horsepower and a maximum torque of 440 Nm. In general, there are no complaints about the engine. It is quite reliable and economical, and does not require special attention in maintenance. The chassis is wheeled, 4 by 4. The front drive axle with planetary-cylindrical gearboxes, increased load-bearing capacity. The axle half-shafts are reinforced so that the tractor can withstand significant loads and be a reliable support for serious mounted equipment.

Equipment: Air conditioner

Delivery worldwide
Uzbekistan Delivery throughout Uzbekistan

Profitable terms
purchases Favorable terms of purchase

Price: on request

Are available

Buy Submit your application

1. 110 hp engine, which increased the tractor's productivity.
2. Beam-type front axle with increased load capacity. Ideal for use with a tractor with a front loader. ATTENTION! The front track of the tractor is adjusted in steps by rearranging the wheels.
3. Three-range gearbox with 16 forward gears and 8 reverse gears, which enables the optimal selection of transmission ratio for each agricultural technological operation;
4. Central outlet for the cardan shaft of the front drive axle, which made it possible to simplify the design while increasing its overall reliability (the intermediate support was eliminated).

Engine
Engine type: Diesel turbocharged
Power, kW (hp): 81.0 (110.2)
Environmental standard: Stage II
Engine model: D-245S2
Rated rotation speed, rpm: 2200
Number of cylinders, pcs.: 4
Working volume, l.: 4,750
Maximum torque, Nm: 429
Specific fuel consumption, g/kWh: 249
Fuel tank capacity, l.: 156

Chassis system
Type: Wheeled
Wheel formula: 4K4

Transmission
Clutch: Dry, double-disc
Gearbox: Synchronized
Front drive axle type: Beam
Number of gears: forward/reverse: 16/8
Travel speed km/h: forward/backward: 2.3 – 36.6 / 4.1 – 17.2
Rear PTO independent I, rpm: 540
Rear PTO independent II, rpm: 1000
Rear PTO synchronous I, rpm path: 3.5
Differential lock: Hydraulic

Dimensions, weight and equipment
Length/Width/Height, mm.: 4600/1970/2820
Wheelbase, mm: 2570
Track on front wheels, mm: 1535, 1635, 1705, 1805, 1855, 1955, 2020, 2120
Rear wheel track, mm: 1400-2100
Operating weight, kg: 4665
Agrotechnical clearance, mm: 510
Front tire size: 360/70R24
Rear tire size: 18.4R34

Hydraulic suspension system
Type of hydraulic system: Universal, separate-aggregate, with power and positional control of tillage depth
Load capacity of the ZNU on the suspension axis, kg: 4200
Maximum pressure, MPa: 20
Pump capacity, l/min: 45
Hydraulic system tank capacity, l: 25